6ES7288-1CR20-0AA1 - Automates programmables
Désignation de type du produit

CPU CR20 AC/DC/Relais – SIMATIC S7-200 SMART
Référence produit

6ES7288-1CR20-0AA1
Catégorie

Automatisation → Automates programmables
Product type designation

CPU CR20 AC/DC/relay
Programming package

STEP 7 Micro/WIN SMART

CPU CR20 AC/DC/Relais – SIMATIC S7-200 SMART

CPU compacte SIMATIC S7-200 SMART CR20 avec E/S intégrées, alimentation AC, mémoire 20 KB, programmation STEP 7 Micro/WIN SMART.

Disponible sur demande

SKU: 6ES7288-1CR20-0AA1

Description

CPU CR20 AC/DC/Relais – SIMATIC S7-200 SMART

Référence : 6ES7288-1CR20-0AA1

Description WooCommerce

Nom du produit

6ES7288-1CR20-0AA1 (CPU CR20 AC/DC/relai) – SIMATIC S7-200 SMART

Type exact de produit

CPU CR20 AC/DC/relay

Caractéristiques vérifiées et différences pertinentes

  • Onboard I/O: 12 DI 24V DC; 8 DO RELAY 2A
  • Alimentation: AC 85-264 V AC, 47-63 Hz (desktop) ; plage de valeur CA: 85-264 V, 230 V nommée
  • Mémoire: 20 KB (programme/données); type de mémoire: DDR; Flash présent
  • Architecture et options: Programmation via STEP 7 Micro/WIN SMART; rail DIN standard
  • Températures et sécurité électrique: protection inversement polaire No; plage DC 5-250 V; tension DC nominale 24 V; consommation 60 mA (à 220 V AC) et 80 mA (à 220 V AC); perte de puissance 6 W
  • Caractéristiques temporelles: timing et performances par instruction (ex: 150 ns/instruction, 1.2 µs, 3.6 µs selon les groupes); horloge logicielle
  • Interfaces et protocoles: RS 485 (jusqu’à 187.5 kbps); connecteur 9 broches Sub‑D; protections et diagnostics

 

 

Désignation de type du produit CPU CR20 AC/DC/Relais – SIMATIC S7-200 SMART
Référence produit 6ES7288-1CR20-0AA1
Catégorie Automatisation → Automates programmables
Product type designation CPU CR20 AC/DC/relay
● Programming package STEP 7 Micro/WIN SMART
Rail mounting Yes; Standard – DIN rail
Rated value (AC) 230 V; 230 V AC (L1, N)
● 120 V AC Yes; 85 to 132 V AC
● 230 V AC Yes; 170 to 264 V AC
permissible range, lower limit (AC) 85 V
permissible range, upper limit (AC) 264 V
Reverse polarity protection No
● permissible range, lower limit 47 Hz
● permissible range, upper limit 63 Hz
● Rated value (DC) 24 V; DC at 4 mA nominal
● permissible range, lower limit (DC) 5 V
● permissible range, upper limit (DC) 250 V
Current consumption (rated value) 60 mA; At 220 V AC
Current consumption, max. 80 mA; At 220 V AC
Inrush current, max. 16.3 A; at 264 V
Power loss, max. 6 W
Type of memory DDR
Flash Yes
RAM Yes
Micro Memory Card No
for bit operations, typ. 150 ns; / instruction
for word operations, typ. 1.2 µs; / instruction
for floating point arithmetic, typ. 3.6 µs; / instruction
Integrated power supply No
● Type Software clock
● Hardware clock (real-time) No
Number of digital inputs 12; Integrated
● of which inputs usable for technological functions 4; HSC: 4 @ 100 kHz single phase, 2 @ 50 kHz A/B phase
Sourcing/sinking input Yes
● Type of input voltage DC
● for signal “0” < 5 V DC
● for signal “1” +15 to +30 V
● for signal “0”, max. (permissible quiescent current) 1 mA
● for signal “1”, typ. 4 mA
— parameterizable Yes; 0.2 µs, 0.4 µs, 0.8 µs, 1.6 µs, 3.2 µs, 6.4 µs and 12.8 µs, selectable in 4 groups
— at “0” to “1”, min. 0.2 µs
— at “0” to “1”, max. 12.8 µs
● shielded, max. 500 m
● unshielded, max. 300 m
Number of digital outputs 8; Relays
● with resistive load, max. 2 A
● on lamp load, max. 30 W; 30 W with DC, 200 W with AC
● “0” to “1”, max. 10 ms; max.
● “1” to “0”, max. 10 ms; max.
● of the pulse outputs, with resistive load, max. 1 Hz
● Number of relay outputs 8
● Number of operating cycles, max. 10 000 000; mechanically 10 million, at rated load voltage 100 000
Number of industrial Ethernet interfaces 0
Number of RS 485 interfaces 1
Optical interface No
Interface type RS 485 (max. 187.5 kbps)
Isolated Yes; 500 V AC or 707 V DC
● RS 485 Yes
● Design of the connection 9-pin sub D socket
Supports protocol for PROFINET IO No
PROFIBUS No
● TCP/IP No
● Interference immunity against discharge of static electricity acc. to IEC 61000-4-2 Yes
— Test voltage at air discharge 8 kV
— Test voltage at contact discharge 4 kV
● Interference immunity against high-frequency radiation acc. to IEC 61000-4-3 Yes; 10 V/m, 80 to 1 000 MHz (to IEC 61000-4-3); 10 V/m, 900 MHz, 1.89 GHz, 50% ED (to IEC 61000-4-3)
— Frequency range of the RF radiation 10 V/m for 80 MHz ~ 1 GHz, 3 V/m for 1.4 GHz ~ 2 GHz, 3 V/m for 87 MHz ~ 108 MHz, 174 MHz ~ 230 MHz, 470 MHz ~ 790 MHz, 1.4 GHz ~ 2 GHz, 1 V/m for 2 GHz ~ 2.7 GHz
● Interference immunity on supply lines acc. to IEC 61000-4-4 Yes; ±2 kV acc. to IEC 61000-4-4, burst; surge measurements with additional protective elements
● Interference immunity on signal cables acc. to IEC 61000-4-4 Yes; ±2 kV acc. to IEC 61000-4-4, Burst
● Interference immunity on supply lines acc. to IEC 61000-4-5 Yes; ±1 kV (acc. to IEC 61000-4-5; 1995; surge symm.), ±2 kV (acc. to IEC 61000-4-5; 1995; surge asymm.), no external protective circuit required
— Test voltage on supply cables 2 kV
— Test voltage on signal cables >30m 2 kV
● Interference immunity against high frequency current feed acc. to IEC 61000-4-6 Yes; 10 V, 150 kHz to 80 MHz (to IEC 61000-4-6)
● Limit class A, for use in industrial areas Yes; Emission of radio interference acc. to EN 61000-6-4 +A1 for use in industrial environments
● Interference emission via line/AC current cables EN 61000-6-4, interference emission: Intended for use in industrial areas.
IP degree of protection IP20
CE mark Yes
● Fall height, max. 0.5 m; five times, in product package
● min. -40 °C
● max. 70 °C
● horizontal installation, min. 0 °C
● horizontal installation, max. 55 °C
● vertical installation, min. 0 °C
● vertical installation, max. 45 °C
● Storage/transport, min. 660 hPa
● Storage/transport, max. 1 080 hPa
● Installation altitude, min. -1 000 m
● Installation altitude, max. 2 000 m
● Operation at 25 ℃ without condensation, max. 95 %
— LAD Yes
— FBD Yes
— STL Yes
Width 90 mm
Height 100 mm
Depth 81 mm
Weight, approx. 365 g; approx.
Onboard I/O 12 DI 24V DC; 8 DO RELAY 2A
Alimentation AC 85-264 V AC, 47-63 Hz (desktop) ; plage de valeur CA: 85-264 V, 230 V nommée
Mémoire 20 KB (programme/données); type de mémoire: DDR; Flash présent
Architecture et options Programmation via STEP 7 Micro/WIN SMART; rail DIN standard
Températures et sécurité électrique protection inversement polaire No; plage DC 5-250 V; tension DC nominale 24 V; consommation 60 mA (à 220 V AC) et 80 mA (à 220 V AC); perte de puissance 6 W
Caractéristiques temporelles timing et performances par instruction (ex: 150 ns/instruction, 1.2 µs, 3.6 µs selon les groupes); horloge logicielle
Interfaces et protocoles RS 485 (jusqu’à 187.5 kbps); connecteur 9 broches Sub‑D; protections et diagnostics

 

Additional information

Désignation de type du produit

CPU CR20 AC/DC/Relais – SIMATIC S7-200 SMART
Référence produit

6ES7288-1CR20-0AA1
Catégorie

Automatisation → Automates programmables
Product type designation

CPU CR20 AC/DC/relay
Programming package

STEP 7 Micro/WIN SMART